SYS-BDOX

D-BOX

Products > Industrial System > Embedded System > SYS-BDOX

Smart Factory

Transportation

Healthcare

Marine

Telecom

Fanless

Features

Support RS232/RS422/RS485

Expandability

16x Digital I/O

wireless control

Military Standard – Shock and vibration

Wide Input Range DC12V~48V

SPEC

	Model Name	SYS-BDOX
Analog Input	Resolution	16-Bit
	Number of channels	4 differential (simultaneous-sampling)
	Maximum sampling rate	2MS/s per channel
	Programmable gain	1, 5
	Input range (Voltage)	± 10 V, ± 2 V
	Offset error	± 1mV (gain=1) ± 0.2mV (gain=5)
	Gain error	Typical: ± 0.01% of FSR (gain=1 & 5) Maximum: ± 0.02% of FSR (gain=1 & 5)
	-3dB Bandwidth	600 kHz
	CMRR (fin=1 kHz)	80 dB (gain=1) 90 dB (gain=5)
	SFDR (fin=10 kHz)	98 dB (gain=1 & 5)
	SINAD (fin=10 kHz)	89 dB (gain=1 & 5)
	THD (fin=10 kHz)	-100 dB (gain=1 & 5)
	SNR (fin=10 kHz)	89 dB (gain=1 & 5)
	ENOB (fin=10 kHz)	14.3-bit (gain=1 & 5)
	FIFO buffer size	256M Samples
	Trigger sources	Software, external digital, analog trigger ( from one analog input channel)
	Trigger mode	Post trigger, pre-trigger, delay trigger, middle trigger, gate trigger, post or delay trigger with re-trigger
	External A/D conversion source	Yes (from CONV)
	Input coupling	DC
	Overvoltage protection	Power on: ± 35 V Power off: ± 15V
	Input impedance	1 GΩ
	Data transfer	Programmed I/O, continuous (USB bulk transfer mode)
Function I/O	Mode*	Digital I/O, general timer/counter, pulse generation
	Digital I/O	8 DI / 4 DO (TTLLVTTL level)
	General timer/counter	Two 32-bit, base clock: 80 MHz, external to 10 MHz
	Pulse generation	Two PWM outputs (Modulation frequency: 0.01 Hz to 5 MHz; duty cycle: 1%-99%)
General Specifications	Interface	USB 2.0 high speed
	I/O connector	Two 20-pin removable screw terminals
	Operating temperature	0 to 55°C (32 to 131°F)
	Storage temperature	-20 to 70°C (-4 to 158˚F)
	Relative humidity	5 to 95% non-condensing
	Power requirements	5V@ 500 mA (USB bus powered)